For this SCB command, the blocks specified are read and the data is transferred into the on-card disk cache for later access by a Read Data command. The block length specified must be 512 bytes and the block count must be less than or equal to 17 for the command to transfer data into the cache. If other values are specified, the command is treated as a no-operation. This command is supported only by the cached adapter. The non-cached adapter will reject this command with a Command Error Interrupt ID. The presence of a cached adapter can be determined by bit 11 of the Cache Information word in the Command Complete Status Block. If this bit is set to 1, the adapter has a cache. Otherwise, no cache is present.

ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0    Remarks

 0  0  0  1  1  1  0  0 ND NS  1  1  0  0  0  1    Read Prefetch
 1 ES RE  0  0  0  1  0  0  0  0  0  0  0  0 CH    Enable Word
 <---------- Least Significant Word ---------->    Logical Block
 <---------- Most Significant Word ----------->     Address
 <---------- Reserved ------------------------>
 <---------- Reserved ------------------------>
 <---------- Reserved ------------------------>
 <---------- Reserved ------------------------>
 <---------- Least Significant Word ---------->    Termination Status Block
 <---------- Most Significant Word ----------->     Address
 <---------- Least Significant Word ---------->    Optional SCB Chain
 <---------- Most Significant Word ----------->     Address
 <---------- Number of Blocks ---------------->    Block Count
 <---------- Block Size ---------------------->    Block Length
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ


[Back: Device Capacity Data Block]
[Next: Read Verify]