The WSFORMAT command is the Winsock trace formatter. The WSFORMAT command
accepts the binary trace input from a serial port, file, or OS/2 pipe, and
converts the input into a readable format that can then be displayed on-screen
or written to a file, serial port, or OS/2 pipe.
Syntax
ÄWSFORMATÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÃÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄ´
³ ÃÄinput_filenameÄ´ ³
³ ÃÄCOM1ÄÄÄÄÄÄÄÄÄÄÄ´ ³
³ ÃÄCOM2ÄÄÄÄÄÄÄÄÄÄÄ´ ³
³ ÃÄCOM3ÄÄÄÄÄÄÄÄÄÄÄ´ ³
³ ÀÄCOM4ÄÄÄÄÄÄÄÄÄÄÄÙ ³
³ ÚÄWSTRACEÄÄÄÄÄÄÄÄ¿ ³
ÀÄ -p ÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÙ
ÀÄinput_pipenameÄÙ
ÚÄWSFORMAT.DMPÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
ÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÀÄ -f formatted_output_filenameÄÙ
ÚÄWSTRACE.DMPÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
ÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÀÄ -b binary_output_filenameÄÙ
Parameters
input_filename
Specifies the file name of
the input file containing the trace information to format. COM1, COM2,
COM3, and COM4 may be used to accept trace data from a serial port.
-p
input_pipename
Specifies the pipe name of
the OS/2 pipe that contains the trace data to format. Pipe names do not
have to include a \PIPE\ prefix. If input_pipename is not specified
with the -p parameter, the pipe name defaults to WSTRACE.
-f
formatted_output_file
Specifies the file
name of the file that the formatted trace output will be written to. If
formatted_output_file is not specified with the -f parameter, the
file name defaults to WSFORMAT.DMP in the current directory.
-b
binary_output_file
Specifies the file name
of the file that will receive a copy of the binary information being formatted.
This can be used to save a copy of the trace information coming from a
serial port or pipe. If binary_output_file is not specified with
the -b parameter, the output file name defaults to WSTRACE.DMP in the local
directory.
Notes:
- If the -f option is not specified, the formatted
trace output is written to the screen.
- When specifying a serial port as the Winsock
trace device, be sure that the serial port settings match on both ends of
the line. The OS/2 MODE command lets you set the serial port settings. For
more information about the MODE command, see the OS/2 Command Reference
or enter:
help mode
in an OS/2 session.
[Back]
[Next]